This is a simple swap the object puzzle using RFID and Arduino. Each RFID reader is connected to an Arduino Nano, and the two puzzle modules communicate via a high/low logic state single wire connection. This way the two modules only need a light gauge 3 core wire in order to power and communicate with…
This is one of my favorite puzzles, it’s a simple ball maze, that hangs from the ceiling, and requires two or more people to attach magnetised objects to each corner of the maze in order to manipulate the ball out. The maze layout was designed at 3am on some scrap paper while watching the original…
This is a rather simple, match-the-words switchboard style of puzzle. It has 6 vacuum tubes…. the old ones from the Cosmos rebuild actually… which light up every time you get a combination correct. The puzzle is made out of Batu timber, with an MDF switchboard plate and a piece of poly-carbonate in front of the…
One of the larger puzzles in the escape room is the bed puzzle. The premise of this puzzle is that there are two balls inside the bed, that must be nudged around an obstacle course and out of an exit hole using a remote controlled car… The catch is that the controls for the car…